K274122 700-52LS

K274122 700-52LS

USD339.90

PYRO 700 The PYRO 700 is the motor for 600 and 700 sized helicopters.  It is the ultimate motor for all helicopter pilots who know how 3D must look like. To use the PYROs to full capacity it can be reasonable to mount a counter bearing. So al...

K274142 Kontronik Pyro700-45LS Brushless Motor

K274142 Kontronik Pyro700-45LS Brushless Motor

USD339.90

PYRO 700 The PYRO 700 is the motor for 600 and 700 sized helicopters.  It is the ultimate motor for all helicopter pilots who know how 3D must look like. To use the PYROs to full capacity it can be reasonable to mount a counter bearing. So ...

MIK4411 Pinion for herringbone gear 11 teeth M1 Dia.6mm

USD22.00

4411 Pinion for herringbone gear 11teeth, M1, dia.6mm   Use for LOGO 600 / LOGO 600 SE / LOGO 600 SE 2010-2013 / LOGO 600 SX Note: Pinion can only be used with 6mm motor shaft   Specifications: Pinion (11T Mod 1 ...

MIK4412 Pinion for herringbone gear 12 teeth M1 Dia.6mm

USD22.00

4412 Pinion for herringbone gear 12teeth, M1, dia.6mm   Use for LOGO 600 / LOGO 600 SE / LOGO 600 SE 2010-2013 / LOGO 600 SX Note: Pinion can only be used with 6mm motor shaft   Specifications: Pinion (12T Mo...

MIK4413 Pinion for herringbone gear 13 teeth M1 Dia.6mm

USD23.00

4413 Pinion for herringbone gear 13teeth, M1, dia.6mm   Use for LOGO 600 / LOGO 600 SE / LOGO 600 SE 2010-2013 / LOGO 600 SX Note: Pinion can only be used with 6mm motor shaft Specifications: Pinion (13T Mod 1 6mm D...

MIK4415 Pinion for herringbone gear 15 teeth M1 Dia.6mm

USD23.00

4415 Pinion for herringbone gear 15teeth, M1, dia.6mm   Use for LOGO 600 / LOGO 600 SE / LOGO 600 SX / 690SX   Specifications: Pinion for herringbone gear x 1       ...

MIK4489 PINION FOR HERRINGBONE GEAR 18TEETH, M1, DIA.8MM

USD22.00

4489 Pinion for herringbone gear 18teeth, M1, dia.8mm   Use for LOGO 800 XXTREME / LOGO 700 XXTREME   Specifications: Pinion (18T Mod 1 diameter 8mm) x 1 ...

MIK4490 PINION FOR HERRINGBONE GEAR 19TEETH, M1, DIA.8MM

USD22.00

4490 Pinion for herringbone gear 19teeth, M1, dia.8mm   Use for LOGO 800 XXTREME / LOGO 700 XXTREME   Specifications: Pinion (19T Mod 1 diameter 8mm) x 1       ...

MIK4635-Mikado Herringbone Pinion Mod 1 11T 6mm Diameter

USD21.00

4635 Pinion for herringbone gear 11teeth,M1,dia.6mm,14mm   Use for LOGO 600 SX   Specifications: Pinon (11T Mod 1 Diameter 6mm, 14mm Height) x 1     ...

MIK4716 MIKADO PINION FOR HERRINGBONE GEAR 16TEETH, M1, DIA.8MM

USD22.00

4716 Pinion for herringbone gear 16teeth, M1, dia.8mm   Use for LOGO 800 XXTREME / LOGO 700 XXTREME   Specifications: Pinion (16T Mod 1 diameter 8mm) x 1 ...

Scorpion HKIII4035-450Kv Motor (6mm Shaft)

USD200.00

Scorpion HKIII4035-450Kv Motor (6mm Shaft)     The Scorpion HKIII-4035 Series Motor* is designed for using on 700 class helicopters running on 12-cell Li-Po power. This motor represents the most technologically advanced power sou...

Showing 1 to 13 of 13 (1 Pages)

Demo Options

pattern 28
pattern 29
pattern 30
pattern 31
pattern 32
pattern 33
pattern 34
pattern 35
pattern 36
pattern 37
pattern 38
pattern 39
pattern 40
pattern 41
pattern 42
pattern 43
pattern 44
pattern 45

Background only applies for Boxed,Framed, Rounded Layout