Skip to product information
1 of 8


5474 LOGO 200 Super Bind&Fly Premium Case Combo

5474 LOGO 200 Super Bind&Fly Premium Case Combo

SKU: MIK5474
Regular price $899.99
Regular price $899.99 Sale price $899.99
Sale Sold out
Shipping calculated at checkout.

Shipping rates for this item apply to EMS or small sized air packet only. If you choose shipment by Fedex or others, extra shipping fees will be required.
Since there is battery inside the device, only particular carrier can ship so far. However, siturations may change from time to time. We will help to choose the appropriate courier if available.
Separate email for the extra funds required will be sent after order placed.
Or please put remark during ordering process or
email to us for a manual re-calculation for you.
Appreciate your understanding. Thank you very much!

 ***Vbar Control NOT included***

LOGO 200

  • BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
  • Exceptional flight performance, comparable to larger 600-700 class helis
  • Equally suitable for sports flying, aerobatics and 3D flying
  • Wide range of head speeds, from 2,500-7000+ 1/min possible
  • Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
  • Dual Motor System, direct drive for main and tail rotor
  • Dual ESC with metal case
  • VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
  • VBar NEO already set up, no setup on your own required, just bind and fly
  • VBar NEO Governor with RPM telemetry
  • Micro digital servos with metal gears for the swashplate
  • Carbon frame and landing gear
  • Aluminum rotor head and swashplate
  • VTX main rotor blades
  • Glass Fiber Airbrush canopy

This LOGO 200 does not support other radio systems than VBar Control, without further adjustments.

At your own discretion, you can use VBar Control to select a digital third party protocol as an input, and make the necessary channel adjustments.
You then obviously also need a suitable separate third party receiver.
Adjustments to the flight parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.
If set up properly, you can then fly the model with VBar's motor switch logic, three parameter banks, and use Rescue and/or Beginner mode (if installed).

Product data

Specifications Helicopter

Rotor diameter 400 mm
Rotor blades VTX 173 mm
RTF weight approx. 310 g
Recommended batterie Lipo 3S-650 mAh (included)
Main gear ratio 1
Tail gear ratio 1
Main Gear size ./.
Length 420 mm
Hight 135 mm
Width 74 mm



Kit LOGO 200 Super Combo ARF
Radio Accessories Quality carrying case with embossed faux leather
VBar electronic VBar NEO mini VLink 6.4
Servos 3 x digital micro servo w/ metal gears, OMPHOBBY
Blades VTX 173 mm
Tail Blades 71 mm
Canopy Airbrush canopy

*pictures and photos for reference only


View full details