Mikado
5628 LOGO 200-V8 Bind&Fly Combo, neon-yellow/orange
Couldn't load pickup availability
Shipping rates for this item apply to EMS or small sized air packet only. If you choose shipment by Fedex or others, extra shipping fees will be required.
Since there is battery inside the device, only particular carrier can ship so far. However, siturations may change from time to time. We will help to choose the appropriate courier if available.
Separate email for the extra funds required will be sent after order placed.
Or please put remark during ordering process or
email to us info@mikadoasia.com for a manual re-calculation for you.
Appreciate your understanding. Thank you very much!
Q & A:
Can I update my existing LOGO 200 to LOGO 200 V8?
VBar EVO micro as well as the OMP-ESC with built-in telemetry will be available separately, but at a later date.
When you exchange both, it's the same hardware version as LOGO 200 V8.
Mind that this is only possible for LOGO 200 with VBar NEO micro. VBar NEO mini still has different servo connectors.
Is there an upgrade or trade-in program?
Unfortunately, the answer is no.
Can LOGO 200 V8 be updated to Rescue?
VBar EVO micro V8 on LOGO 200 is already a Pro-Version.
On vstabi.info, you can purchase the additional update to Rescue (including Beginner Mode).
LOGO 200 V8
- BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
- Exceptional flight performance with new V8 software, comparable to larger 600-700 class helis
- Equally suitable for sports flying, aerobatics and 3D flying
- Wide range of head speeds, from 2,500-7,000+ 1/min possible
- Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
- Dual Motor System, direct drive for main and tail rotor (DShot 1000)
- NEW Dual ESC with metal case with full telemetrie
- NEW VBar EVO micro V8 Flybarless System
- VBar EVO already set up, no setup on your own required, just bind and fly
- VBar EVO Governor with RPM telemetry
- Micro digital servos with metal gears for the swashplate
- Carbon frame and landing gear
- Aluminum rotor head and swashplate
- VTX main rotor blades
- Glass Fiber Airbrush canopy
- This LOGO 200 does not support other radio systems than VBar Control
Product data
| Specifications Helicopter | |
| Rotor diameter | 400 mm |
| Rotor blades | VTX 173 mm |
| RTF weight | approx. 310 g |
| recommended batterie | Lipo 3S-650 mAh (included) |
| Main gear ratio | 1 |
| Tail gear ratio | 1 |
| Main Gear size | ./. |
| Length | 420 mm |
| Hight | 135 mm |
| Width | 74 mm |
| Content | |
| Kit | LOGO 200 Super Combo ARF |
| Motors | OMPHOBBY w. telemetry |
| ESC | OMPHOBBY |
| VBar electronic | VBar EVO micro VLink V8 Pro |
| Servos | 3 x digital micro servo w/ metal gears, OMPHOBBY |
| Blades | VTX 173 mm |
| Tail Blades | 71 mm |
| Canopy | Airbrush canopy |
*Pictures and Photos for reference only
